fredw
Active VIP Member
...well i had looked at some nice trailers the last year and was going to go with the gooseneck(trailwest), but made the decision to go with a local builder instead... he just got his shop tooled up and was very intrested in doing us a trailer the way i wanted it... he ran a trailer sales shop and was bringing in atlas sled trailers previously... he said after selling 50 or so for them he and the atlas rep finnally decided to go on their own...lol
its going to be a 29foot so it should easly handle four 174 sleds, and we dress it up as much as was possible, we went with 3/8 plywood all around with white 1/4 sheeting vionel in the inside, with chrome plating trailer will be insulated on all four sides, we went with a full side of upper cabnets 20x24, with a 40000 btu heater in the middle cabnet vent out threw cabnets, 45 gallon fuel caddy underneath rear axle, and piped in threw cabnet to fill from inside with pump(racefuel)
we went with four chris brant style fold down alu benches on oppsite wall, with fuel doors... t5 led 110v lighting, with led 12 volt lighting in the middle, went in the cone of the trailer with a full size work bench with large doors underneath for a owan 1600 watt generator with remote start, batttery backup and propane bottle storage... went with 500watt dvd,cd stero with 12inch sub in nose corner, roof mount 32inch led tv for sled movies and helmet cam footage... and finished other side of cone of with mid size full height toolbox, and wall mount barbicue, with over head fan
5100 pound axles on 16" single axle tires on all rims, with full light and chrome package... black in color
hope they can produce the trailer we were quoted... keep you informed
its going to be a 29foot so it should easly handle four 174 sleds, and we dress it up as much as was possible, we went with 3/8 plywood all around with white 1/4 sheeting vionel in the inside, with chrome plating trailer will be insulated on all four sides, we went with a full side of upper cabnets 20x24, with a 40000 btu heater in the middle cabnet vent out threw cabnets, 45 gallon fuel caddy underneath rear axle, and piped in threw cabnet to fill from inside with pump(racefuel)
we went with four chris brant style fold down alu benches on oppsite wall, with fuel doors... t5 led 110v lighting, with led 12 volt lighting in the middle, went in the cone of the trailer with a full size work bench with large doors underneath for a owan 1600 watt generator with remote start, batttery backup and propane bottle storage... went with 500watt dvd,cd stero with 12inch sub in nose corner, roof mount 32inch led tv for sled movies and helmet cam footage... and finished other side of cone of with mid size full height toolbox, and wall mount barbicue, with over head fan
5100 pound axles on 16" single axle tires on all rims, with full light and chrome package... black in color
hope they can produce the trailer we were quoted... keep you informed
beer
