yamaha valve adjust?

[coolpete1]

do you have to adjust valve lash on a yamaha 350 engine? its in an 04 bruin.

 

[Garryese]

Yes. If you don't have 50 hours on it, wait until you do.

Remove tank cover and fuel tank. Set intake at 004 ond exhuast at 006. Re-assemble.

 

[leonard]

yaaaaaa i need to do this on my grizzly.
but you know how it is when you don't want to do something haha.
hope my snorkel doesn't screw me up it runs along the inside of shifter.

 

[Garryese]

Leonard, snorkles usually don't cause a problem at the shifter. Some cause grief in the way they enter the air box, how tight they are to the tank and tank cover.

Hint for the Grizz. Front tank bolts can be remove with a 10mm socket and long extension. There is a access hole directly above the bolt and beside the dash, and under the front cover.

 

[leonard]

its a rear clutch snorkel that comes around the shifter side along the inside . and runs past the head and down into the front then up. not a airbox snorkel kit.

 

[Garryese]

That snorkle won't be a problem. Just work from the right side of the machine.