Oct 19, 2012 #1 T Timber_12 Active VIP Member Joined May 7, 2010 Messages 291 Reaction score 347 Location Grande Prairie, Ab Thinking of putting a diamond drive on a polaris. Which one do I need to utilize the PERC?
Oct 19, 2012 #2 Pink-Inc Active VIP Member Joined Feb 3, 2008 Messages 1,068 Reaction score 901 Location Wembley Should be anyone from '09+. The '05/6 may work too I'd imagine and would be stronger. This going on an IQR?
Should be anyone from '09+. The '05/6 may work too I'd imagine and would be stronger. This going on an IQR?
Oct 19, 2012 #3 tantrumpipeline Active VIP Member Joined Dec 15, 2010 Messages 1,133 Reaction score 1,125 Location Grande Prairie/Kamloops buy a skidoo, problem solved, didn't you know they're the best thing ever made
Oct 19, 2012 #4 dezmitchell Active VIP Member Joined Jun 8, 2008 Messages 1,408 Reaction score 1,024 Location Calgary now you got my attention what is this "project" you speak of?
Oct 19, 2012 Thread starter #5 T Timber_12 Active VIP Member Joined May 7, 2010 Messages 291 Reaction score 347 Location Grande Prairie, Ab Going into a iqr. Either belt drive or DD to fit a 3"
Oct 19, 2012 #6 Pink-Inc Active VIP Member Joined Feb 3, 2008 Messages 1,068 Reaction score 901 Location Wembley Not sure on the new 15 wide 3" but on the 16 you have to cut some nubs and clips so it doesn't rub the DD. I had to do this on my '09 but not sure on the '05/6 DD
Not sure on the new 15 wide 3" but on the 16 you have to cut some nubs and clips so it doesn't rub the DD. I had to do this on my '09 but not sure on the '05/6 DD
Oct 19, 2012 #7 moyiesledhead Active VIP Member Joined Oct 12, 2008 Messages 5,434 Reaction score 10,775 Location Moyie B.C. Won't have to on the 05/06. Smaller case due to no reverse gearing.