When Bad Gets Worse...Lessons learned the hard way

[mrsummit700]

My story starts off with a stator bolting coming loose and smacking around freely in the crankcase. (see picture posted) Then to add icing to the cake...Bad weather bring down a tree on top of my little work shop and takes out 1 spark plug and temp sensor (see picture posted) (Yes the engine was on the table)
Total damage done .... 1 bolt = stator / pulse coil / flywheel / recoil part
Bad Weather = 1 spark plug / 1 temp sensor

--------Any Ideas on how to remove the little threaded brass insert ?

 

[pipes]

My story starts off with a stator bolting coming loose and smacking around freely in the crankcase. (see picture posted)View attachment 163625 Then to add icing to the cake...Bad weather bring down a tree on top of my little work shop and takes out 1 spark plug and temp sensor (see picture posted)View attachment 163626 (Yes the engine was on the table)
Total damage done .... 1 bolt = stator / pulse coil / flywheel / recoil part
Bad Weather = 1 spark plug / 1 temp sensor

--------Any Ideas on how to remove the little threaded brass insert ?

drill a small hole in the center and insert an "Easy Out" should just back out.

good luck.

 

[mrsummit700]

The insert is hollow minus the thin covering at the end of it ... I've applied jb weld and a bolt...hopefully it works