What, if any changes were made to clutching and gearing from 14 163 to T3 174 ???

[RaspberryNytro]

I realize there will be a few changes, due to track length, etc. but I was also wondering about differences in chain cases and gearing ???
Can I switch over my C3 belt drive from last years sled?
Shockwave should fit I would imagine, hey ???
Let me know what you think.... Or even if you've done any of these things.

Cheers
RN

 

[FranktheTank]

The chain case is longer on T3 ' s so no go on the belt drive. Longer belt new cover might work for ya. Same secondary so your Shockwave is good.

 

[captain extreme]

Just installed c3 on my t3 last weekend, the cover and belt is different from the stock length chain case, I would keep your c3 from you 14, if that is what you were wondering and just call Kevin and order the cover, belt and new gearing if you need it. Would have to confirm that the tensioner assembly is different. You can buy all the parts individually may be cheaper just to buy what you need

if I was at home I'd measure it up next to my 14 for ya..

 

[RaspberryNytro]

That's what I figured, but wasn't 100% sure on the chain case... Thx

 

[oler1234]

Change's from a 14 -163 to a 15 - 174 are not much really in terms of clutching and gearing

they have the same gearing 19/51
primary they only changed the ramp to 439? Which is very similar to the djmtn ramps
same primary spring
Secondary is the same helix and spring