Nov 2, 2011 #1 M1000CAT Active member Joined Apr 10, 2009 Messages 116 Reaction score 23 Location Spruce Grove Does any one know the proper torque spec for the trackshaft nut at brake rotor is? I don't want to put to much extra pressure on bearing. Thanks
Does any one know the proper torque spec for the trackshaft nut at brake rotor is? I don't want to put to much extra pressure on bearing. Thanks
Nov 2, 2011 #2 DPike Active member Joined Oct 6, 2010 Messages 44 Reaction score 15 Location calgary, ab 70 ft-lb - Cat Torque/Tech/Specs here. - SnoWest Snowmobile Forum
Nov 7, 2011 #3 L large52 New member Joined Oct 2, 2011 Messages 2 Reaction score 0 I'm seeing 120 on the spec sheet.
Nov 15, 2011 #4 L large52 New member Joined Oct 2, 2011 Messages 2 Reaction score 0 Is 120 correct or 70, trying to make sure?
Nov 15, 2011 #5 stormtrooper Active VIP Member Joined Mar 27, 2010 Messages 266 Reaction score 144 Location wct, ab 120ft-lb is for the retaining locknut by the brake ... 70ft-lb for the trackshaft bolt that you remove when removing dd.
120ft-lb is for the retaining locknut by the brake ... 70ft-lb for the trackshaft bolt that you remove when removing dd.