Tekonsha Brake controller (voyager brand)

[Summitric]

also there should be 2 heavy wires and 2 lighter wires.

The red small is from the pedal
the blue - blue is the brake out wire
red or black heavy wire is power
white is ground

sent from my htc-z710a using tapatalk

what tex78 says here......... Most shebbies are wired this way

 

[Summitric]

It must be plugged into the trailer before the lite comes on or operates.........

 

[GYMBRAT]

mine lights up with or without the trailer/lights connected, and its rainin out so i cant tell ya what make mine is atm i'll melt if I run out there

 

[medler]

Here is the problem ...

 

[medler]

This was the solution
And beer of course

 

[medler]

I guess when it comes down to stopping a heavy load... It don't pay to be cheap

 

[09 arctic cat m8]

the p2 is a good brake controller i run a p3 and its pretty nice

 

[medler]

Ya it should work. I will go out tonight and plug it in and check

 

[09 arctic cat m8]

the p2 is a decent controller i run also a p3 in the dodge and works great

 

[Summitric]

The voyagers are good solid reliable units...... We've installed lots of voyagers and lots of prodigys..... Have never had a problem with either......

 

[medler]

Well it still doesn't work.... Gotta be a pin in the jumper wire that goes from the controller to the truck. maxi fuse is good in stud1 location under hood
And can someone tell me why there is no power at the 7 way plug when you hook a test light to the electric brake tab in the plug??? My 08 and her 04 doesn't have power. Grrrrrrrr

 

[higher n you]

Well it still doesn't work.... Gotta be a pin in the jumper wire that goes from the controller to the truck. maxi fuse is good in stud1 location under hood
And can someone tell me why there is no power at the 7 way plug when you hook a test light to the electric brake tab in the plug??? My 08 and her 04 doesn't have power. Grrrrrrrr

You need power sent from the brake controller. You have to spike the controller while someone watches the test light

 

[medler]

You need power sent from the brake controller. You have to spike the controller while someone watches the test light

I had her hit the spike on my truck and I got a flash of light but on hers I got zero so that leads me to think that there's no power from her controller IDK.

 

[medler]

I think I got er figured. The pin on the jumper was in the wrong place. No power to the controller ... Took just about 5 beer and some figuring
What a pain in the azz. Thanks all for your help !!!

 

[TylerG]

I think I got er figured. The pin on the jumper was in the wrong place. No power to the controller ... Took just about 5 beer and some figuring
What a pain in the azz. Thanks all for your help !!!

hey Medler...... RTFM......

 

[medler]

Ya. I can hear the drums buzzing. Time for food and a beer I say.

 

[medler]

Make sure you wire harness is for an 04! They like to change pin location every year

This was the problem...GRRRR

 

[higher n you]

They do this just to make you buy one for every year of production. Entire plug is identical. Just move 1 pin every year. Bastards!!!

 

[medler]

Ya. Retarded. Oh well. At least I know for next time. Thanks for the help eh!!!

 

[Summitric]

MEDLER........ TIME TO DOO THE HAPPY DANCE