summit 700 pull cord stuck!

pkowall

New member
Joined
Jan 3, 2011
Messages
1
Reaction score
0
Location
sherwood park
hello, i have a 2001 summit 700 zx. had it out this past weekend. check all fluids and engine everything is good. went out for a couple hours stopping here and there. still fired up on first pull. started it up to go went about 75yards and it started to bog out. it didnt make any clanking or rattling. got off and pulled couple times then started up went about 30 feet and bogged out again. went to pull the cord and it was completely locked, i was pulling the sled backwards. when i went and rotated the clutch with my hands the sled would move forward and back. try pulling it back with other sled and track locked up. had to remove belt to move. the pull cord still wont release this morning. any ideas would be greatly apprecitated?

Thanks,
 

rosey

Active member
Joined
Dec 8, 2006
Messages
70
Reaction score
0
Location
Castor Alberta
Did your primary stay closed on your belt? Try picking the sled up and pulling the rope-see if the track turns when you pull the rope. I'm betting you have a primary issue.
 

imdoo'n

Active VIP Member
Joined
Jan 15, 2008
Messages
57,381
Reaction score
50,495
Location
alberta
seized solid, check clutch, gears -chain, brakes , then start looking towards motor
 
Top Bottom