sled deck rewiring input needed

[OnlyPolaris]

I am in the process of rewiring an x-deck i bought. I am needing something to attach from the main deck frame to the outer edge of the extendable side. something that I can attach the wire to so that it can extend and retract with the side when you move it and keep it tucked up under the deck. I know the marathon i had, had some green strapping of some sort. Not sure where to find something like that though. for the life of me i cannot come up with any other ideas. thought i would see what you guys could come up with.

 

[TylerG]

Piece of a milk jug or a wiper fluid jug and attach the wire to that?

 

[Limbo]

How about a long spring functioning similar to the hood cable on the older sleds?

 

[Rotax_Kid]

Would the coiled electrical cables similar to what tractors trailers use work? They will extend and retract on their own.

 

[Bnorth]

Would the coiled electrical cables similar to what tractors trailers use work? They will extend and retract on their own.

That's what bulldog decks use. Slick as goose chit.

 

[f150truck]

Try Gregg Distributors
Hopkins makes them
Endurance Flex Coil 7 RV to 4 wire flat
Part #47065

just cut the ends off and use the coiled wire