Side panels

[Drewmitch]

Hey was wondering how guys are getting side pannels off to do vent kits, does the pivot point break or how does it come off ?

 

[Rjjtcross8]

If you look at the pivot you will see a bolt in the footwell area. You will need a t27 torx bit to undo it.

 

[CatMan16]

There is usually a clip on the inside of the pivot remove that then it pulls out of the rubber mount.


Sent from my iPad using Tapatalk

 

[medler]

I didn't take mine off. Just flip them up and use a hole saw for drilling