Rev Arc snowmobile ramp

AGGRESIVEZEBRA

Active VIP Member
Joined
Dec 1, 2014
Messages
399
Reaction score
434
Location
Edmonton
Don't know if it's still on there but there was a guy selling what looked to be almost new one on Kijiji in Edmonton for 300.
 

rightsideup

Active VIP Member
Joined
May 19, 2008
Messages
3,024
Reaction score
2,833
Location
bc
U have that wrong

T3 is narrow, Polaris is wider

T3 is 36 between skegs

sent while drinking tea's
Not ski stance the ramp to load works well for either machine just storing it was a little more of a pain to because the width of the body of the t3 and even the length.
 

Dooitorbust

Active VIP Member
Joined
Oct 4, 2012
Messages
1,373
Reaction score
8,522
Location
(Currently)Fort McMurray, Kamloops
I left mine in the plastic for about 3 weeks then I saw a young guy in the owlhead parking with a trifold push the ramp forward lift the endgate up then scratch the the crap out of the end gate and tip the sled over. Never seen that before or after. That's when I started learning Chinese.

I did exactly this and my ramp was tied down with a ratchet strap to my hitch.
I managed to score a Rev-Arc with a riser for $200 on Kijiji about a month ago. Super pumped to try it out.
Anyone ever load a Rhino with one? Says their good for 1500lbs.
 

the_real_wild1

Active VIP Member
Joined
Oct 13, 2010
Messages
6,966
Reaction score
7,389
Location
cardiff
I did exactly this and my ramp was tied down with a ratchet strap to my hitch.
I managed to score a Rev-Arc with a riser for $200 on Kijiji about a month ago. Super pumped to try it out.
Anyone ever load a Rhino with one? Says their good for 1500lbs.
Too narrow for a sxs isn't it? I wouldn't use myself even if it was wide enough. You will be at the limit or more then the 1500 IMO.
 
Top Bottom