Piston gone - Sledbunnyracing

SLEDBUNNYRACING

Bad Bunny
Administrator
Moderator
Joined
Oct 20, 2006
Messages
39,540
Reaction score
14,738
Location
Edmonton Alberta, Canada
Website
www.sledbunnyracing.com
2007 Rev with over 6000 k on it.
Last weekend on McBride at km 7 it it stopped running. Pulled a plug and a cylinder was dead.
Pulled it apart and the rings were welded to one of the pistons.
Rebuild time.
It's not about the cost or the hassle, it's about the time I get to spend with my son.
ImageUploadedByTapatalk1394921226.965174.jpg
ImageUploadedByTapatalk1394921240.681084.jpg
ImageUploadedByTapatalk1394921252.664013.jpg ImageUploadedByTapatalk1394921263.743562.jpg
ImageUploadedByTapatalk1394921273.867619.jpg
ImageUploadedByTapatalk1394921282.100228.jpg


Sent from my phone ---- is anyone listening ?
 

imdoo'n

Active VIP Member
Joined
Jan 15, 2008
Messages
57,432
Reaction score
50,559
Location
alberta
oh ****, i thought i was in a horror film when i saw that last pic, then realized it was upside down. spit up alot of beer on that one.
 
  • Thread starter
  • Admin
  • #4

SLEDBUNNYRACING

Bad Bunny
Administrator
Moderator
Joined
Oct 20, 2006
Messages
39,540
Reaction score
14,738
Location
Edmonton Alberta, Canada
Website
www.sledbunnyracing.com
Ordered my replacement 800 Rev Jugs, Postons etc. Should arrive at Sherwood Park Service Mon/Tue. Install (time is always an issue) completed by next weekend.
Thanks to Summitric for sourcing/sharing where he got his same parts for rebuild at Christmas.
Sooo it looks like I should be riding on our trip Mid Apr. ImageUploadedByTapatalk1395363860.549253.jpg


Sent from my phone ---- is anyone there ?????
 

kootenaycat

Active VIP Member
Joined
Dec 18, 2006
Messages
446
Reaction score
421
Location
West Kootenay
Kind of looks like a "4 corner" sieze, did it get rode hard from the parking lot with little to no warm up by any chance? :D
 

SLEDBUNNYRACING

Bad Bunny
Administrator
Moderator
Joined
Oct 20, 2006
Messages
39,540
Reaction score
14,738
Location
Edmonton Alberta, Canada
Website
www.sledbunnyracing.com
Kind of looks like a "4 corner" sieze, did it get rode hard from the parking lot with little to no warm up by any chance? :D

Lots of warm up, slow ride to pay for trail pass, slow start.
6000 km on motor so it was time.




Sent from my phone ---- is anyone there ?????
 

markoo

Active VIP Member
Joined
Nov 9, 2008
Messages
421
Reaction score
361
Location
southern Alberta
Those pistons did not die from old age. Something went wrong. Either overheated or no oil. New pistons won't last long if you don't figure out what caused the problem.
 

Summitric

SUPER COOL MOD & Supporting Vendor
Moderator
Joined
Oct 21, 2006
Messages
48,012
Reaction score
32,148
Location
Edmonton/Sherwood Park
Website
www.bumpertobumper.ca
My bet would be overheated... Can almost see the 4 corner burn, which is usually insufficient warm up, or overheated .... Stuck termostat or broken thermostat like Justin's, would be my bet
 
Last edited:

SLEDBUNNYRACING

Bad Bunny
Administrator
Moderator
Joined
Oct 20, 2006
Messages
39,540
Reaction score
14,738
Location
Edmonton Alberta, Canada
Website
www.sledbunnyracing.com
Those pistons did not die from old age. Something went wrong. Either overheated or no oil. New pistons won't last long if you don't figure out what caused the problem.

My bet would be overheated... Can almost see the 4 corner .... Stuck termostat or broken thermostat like justins
Guess I'll be changing the thermostat as well.



Sent from my phone ---- is anyone there ?????
 

TylerG

Super Mod Geek
Administrator
Moderator
Joined
Nov 7, 2006
Messages
30,584
Reaction score
27,870
Location
Parkland County
My bet would be overheated... Can almost see the 4 corner burn, which is usually insufficient warm up, or overheated .... Stuck termostat or broken thermostat like Justin's, would be my bet

I think he should put a 880 big bore in it..... so he can keep up to CJ :)
 
Top Bottom