I run an '09 M1000 162" Sno Pro w/ a Y pipe, can & big air kit - I'm running Cutler 80-90 gram weights (@ 84.5 grams) & wondering if I should make any other clutching mods?
I also have an 09 sounds like to much weight to me. I ran the stock weights with speedwerx pipe, y pipe, can reeds air intake kit. Have you rode it yet? I pulled great rpms with the stock weights and pulled super hard before I went to the turbo.
I am running roughly the same weight that you are and I have a turbo.
Welcome to snow and mud we hope you enjoy the forum, take some time to look around check out the Arcade / casino and the Army game also take some time to post your location on are google map all of these are on the left hand side of the main page you can earn $600 in casino cash to use in the casino with every post
awesome sled. i run a OVS secondary with a red spring with white strip.
the heavier spring helps alot and it cheap. i also have a Y pipe, SLP pipe and a boondocker, and big air kit. realiable smooth horsepower. and Vforce reeds.
We estimated it to be 195hp at 2000ft above sea level.
i have a 2008 m 1000 snowpro but 153 slp big mouth air kit 09 mbrp can reprogamed ecu ! i'm running dalton heavy tip ajustable wieghts 83 gram - 91 gram with d&d white spring, stock secondary with orange spring and shift asist and im up to 91 grams and it's still pulling it's revs and it pulls hard ! but this is at 3000', i haven't tried it in the hills yet!and i'm sure i'll have to pull out some wieght to keep reves but i will try it thus way first ! easy to change wieght with the daltons .Talked to some guys and there up to 86gams in the hills and still pulling revs