Mike_505_SXF
Member
Hey there I was looking for some Help / Insight on my bike.
I was out riding over the May long and after following up some junior riders (and riding quite slow) my bike heated up and when I went to take off it stalled out...not a seize but a stall and I couldn't get it going after a long cool down.
I pulled the plug and had very minimal compression and when I held my hand over the exhaust it would push and suck
I pulled the head off and can see the cams all turning well. I proceeded to pop the exhaust off and could see the valves all running well.
Right after turning the bike over I can hear a gargling from the exhaust valve area?
I don't know what this could be I would guess a cracked ring or some timing/valve issue.
Any Ideas as to what this could be?
Also and shops/mechanics you could recommend in the stony plain / Edmonton area
Thanks a bunch,
Mike
I was out riding over the May long and after following up some junior riders (and riding quite slow) my bike heated up and when I went to take off it stalled out...not a seize but a stall and I couldn't get it going after a long cool down.
I pulled the plug and had very minimal compression and when I held my hand over the exhaust it would push and suck
I pulled the head off and can see the cams all turning well. I proceeded to pop the exhaust off and could see the valves all running well.
Right after turning the bike over I can hear a gargling from the exhaust valve area?
I don't know what this could be I would guess a cracked ring or some timing/valve issue.
Any Ideas as to what this could be?
Also and shops/mechanics you could recommend in the stony plain / Edmonton area
Thanks a bunch,
Mike