Jaws Shark Pipe 850 Doo

slededjr

Active VIP Member
Joined
Nov 25, 2011
Messages
1,577
Reaction score
1,972
Location
sherwood park
So if the full exhaust set up gives you 10hp, and a new head does 13hp.....how does that not make any sense that you could get 23hp out of it?

Because each is designed on the stock sled. They may make some additional gains together or they might lose. One persons porting for example works with some y pipes and some do not. Until these are tried together (which will be soon) one can’t be sure.
 

FastFarmer

Active VIP Member
Joined
Nov 30, 2009
Messages
2,601
Reaction score
6,054
Location
WESTERN CANADA
Because each is designed on the stock sled. They may make some additional gains together or they might lose. One persons porting for example works with some y pipes and some do not. Until these are tried together (which will be soon) one can’t be sure.

well I for one am going against the grain and common sense and going to hope for 23hp together!
 

Bnorth

Active VIP Member
Joined
Dec 18, 2010
Messages
10,714
Reaction score
20,623
Location
Salmon Arm
So if the full exhaust set up gives you 10hp, and a new head does 13hp.....how does that not make any sense that you could get 23hp out of it?
Seen lots of guys drop money on parts at the performance shop building cars stack hp claims from the parts. They think they've got 400hp and then go run 14 sec 1/4 miles in a fox body lol.

As stated above most parts are tested solo on a stock setup. So to stay with a car analogy the exhaust claims 10hp and the headers claim 20hp but the real restriction was the headers so together you only gain 20hp and some noise.
 

FastFarmer

Active VIP Member
Joined
Nov 30, 2009
Messages
2,601
Reaction score
6,054
Location
WESTERN CANADA
Seen lots of guys drop money on parts at the performance shop building cars stack hp claims from the parts. They think they've got 400hp and then go run 14 sec 1/4 miles in a fox body lol.

As stated above most parts are tested solo on a stock setup. So to stay with a car analogy the exhaust claims 10hp and the headers claim 20hp but the real restriction was the headers so together you only gain 20hp and some noise.

roger that...been drinking fireball in a new trailer all day parked in a ditch with arff and summitric, thought a guy could dream big but I guess reality is what it is! Thanks man!
 

Bnorth

Active VIP Member
Joined
Dec 18, 2010
Messages
10,714
Reaction score
20,623
Location
Salmon Arm
roger that...been drinking fireball in a new trailer all day parked in a ditch with arff and summitric, thought a guy could dream big but I guess reality is what it is! Thanks man!
Go do both and report back, I'd love to see the results. I bet it will still kill a stocker.
 

kanedog

Active VIP Member
Joined
Feb 3, 2015
Messages
3,142
Reaction score
8,636
Location
Kanedog 2015-2019, thanks for the good times S&M!
Will this extra power be transmitted through a hot, slipping clutch?
Those are great hp/tq nums but if your putting 720hp(think 90hp/cylinder) through a slipping transmission, it can be an exercise if futility.
 
Last edited:

deaner

Active VIP Member
Joined
Nov 6, 2008
Messages
3,224
Reaction score
11,178
Location
Creston, BC
Should be interested seeing how these performance parts work out in the field. The nice thing is they all seem to be from pretty reputable companies. Dynoport is known for very solid gains on doos, jaws usually doesnt sell something unless it works (heard their cat setup rips), and hearing good things about powderfreaks. If it was bikeman coming on here and marketing a 10-15hp head or pipe id be a little more cynical.
 

NoBrakes!

Active VIP Member
Joined
Nov 13, 2011
Messages
6,274
Reaction score
12,627
Location
Edmonton
Should be interested seeing how these performance parts work out in the field. The nice thing is they all seem to be from pretty reputable companies. Dynoport is known for very solid gains on doos, jaws usually doesnt sell something unless it works (heard their cat setup rips), and hearing good things about powderfreaks. If it was bikeman coming on here and marketing a 10-15hp head or pipe id be a little more cynical.

but but but Joey said on youtube....
 

Caper11

Active VIP Member
Joined
Oct 28, 2007
Messages
9,583
Reaction score
18,773
Location
Edson,Alberta
Should be interested seeing how these performance parts work out in the field. The nice thing is they all seem to be from pretty reputable companies. Dynoport is known for very solid gains on doos, jaws usually doesnt sell something unless it works (heard their cat setup rips), and hearing good things about powderfreaks. If it was bikeman coming on here and marketing a 10-15hp head or pipe id be a little more cynical.

Well said. Bikeman is claiming 10-12 with a fuel controller.
 

slededjr

Active VIP Member
Joined
Nov 25, 2011
Messages
1,577
Reaction score
1,972
Location
sherwood park
635b5e9d3a030273315fcb6dd2ef991b.jpg


7756a7e3f23dceaf958f6d02b1384eff.jpg


25f95e338719506bf5214ed44b416341.jpg


Adding some HP tonight :)
 

slededjr

Active VIP Member
Joined
Nov 25, 2011
Messages
1,577
Reaction score
1,972
Location
sherwood park
Which silencer will you be running?

This is a going on a customers sled. He has MBRP trail can already and is going to continue to use it. I’ll take some pics as I go and when completed and will post them along with how it went.
 
Top Bottom