Is your Sled ready, whats left?

[rknight111]

I was thinking with sledding right around the corner how many people are ready now, or just starting to get there sleds together and ready. I know some are waiting for there snowchecks to come in...


Me, I have to go pick up my engine and new pipes at Motts in St.Albert, then wait for Summit to come back from Vegas and we have to install it. Then all the other things that go with that. Then just get the gear pulled out and ready for the last week of November

 

[SLEDBUNNYRACING]

800 RMK - New rails, new track, new wheel kit, possible tunnel extension and digitron and she should be ready.
700 RMK - Rail extensions, tunnel extension, new track and ready to roll.
Just waiting for parts from the USA.

I was thinking with sledding right around the corner how many people are ready now, or just starting to get there sleds together and ready. I know some are waiting for there snowchecks to come in...


Me, I have to go pick up my engine and new pipes at Motts in St.Albert, then wait for Summit to come back from Vegas and we have to install it. Then all the other things that go with that. Then just get the gear pulled out and ready for the last week of November

 

[fnDan]

900 RMK. Things to be done before the snow flies:

• remove rad
• shock tower vent
• exhaust side panel vent
• gripper skis
• a-arm protectors
• skidplate
• 2 wheel kit
• upgrade track spring
• chaincase supt bracket
• heat tape on chaincase cover
• the usual stuff like grease zerks, torque some bolts
• avy course in a couple of weeks

Then I'm ready to go. My sled is buried in my brother's garage behind 2 others sleds and a couple of bikes. Just takes some time.

 

[Shredder]

Just pull my rope, point it and let 'er rip.

 

[SLEDBUNNYRACING]

Sucks to be you eh...no weight loss program for the one ton Ski-Rock???

Just pull my rope, point it and let 'er rip.

 

[rmk800]

pretty much ready to go now, just waiting for a hood to be paint and installed

 

[-rossco-]

Got my backup 2000 summit 7 all ready to go and get to pick uo my summit x on saturaday.

 

[Misfit]

Lots on my 04 800 rev
Rail extensions 121 to 136
Tunnel Extension
New hood
New panels
New Bumper
Shocks rebuilt
Install Atac
Maybe new rings if i can swing it.

 

[Shredder]

Sucks to be you eh...no weight loss program for the one ton Ski-Rock???

It's lost all the weight it can without going to visit Rory. Shouldn't you be installing a Doo track on your Polaris open mod climber or something.......

 

[SLEDBUNNYRACING]

You bet...there is a 159" doo track going on the Poo...such is life, I just hope I don't find myself getting stuck all the itme after that.

Cheerz.

It's lost all the weight it can without going to visit Rory. Shouldn't you be installing a Doo track on your Polaris open mod climber or something.......

 

[summitx]

Got it all ready on the weekend, even shined up the tunnel...then decided to sell it, maybe pick up an 05 or 06 instead, we will see.

 

[Summitric]

Yup, Gonna Polish The Big 162" Tunnel Too, Almost Forgot!!! Thanks For The Reminder!!!!!

 

[99summitx]

AAAHHHH Yeah I'm ready, heading out Monday to Sicamous

 

[Dzl]

01 Summit 700

new chain
cleaned rave valves
cleaned and checked carbs/intakes
replaced hifax
replaced rear skid stock skocks with hpg x package t/a's
upgraded springs
installed Tricksled's teflon torsion spacers
new powermadd hand guards
installed clutch clickers
installed cargo rack from 07 gsx which moves the tail light to the back and has the new euro light


left to do:

re-install rear skid ( this weekend)
adjust track
add 2" bar riser
clean and polish exterior tunnel
do snow dance

 

[Shredder]

You bet...there is a 159" doo track going on the Poo...such is life, I just hope I don't find myself getting stuck all the itme after that.

Cheerz.

Isn't there a saying;"If you don't get stuck; you're not trying hard enough".

 

[catmando]

Well I did a ton of stuff but its not ready yet,New Track,Boondocker Nitrous System,Snow Eliminators,likely a digitron and wanted a Boss seat but thought I would try to get one done like a boss seat with my own touch(Orange Arctic Cat)It turned out too cool.Volkers Upolstry Baby,he did exactly what I wanted and did a fine job too.I put the stock seat off the mountain cat beside it and took a picture,Its exactly the same seat just different colour.
catmando!

 

[Dobir]

I took off Thursday and Friday getting our sleds ready, got my new M1000 home and have been playing with the mods before she hits the trail (Rox riser, SLP Vent kit, Boss seat, Jaws can, Helix,etc,...Put a Rox riser on my oldest boys RMK, and a block riser on the youngest, scratchers all around tonight......took all the sleds for a wash and fill...I love the looks on peoples faces...

 

[Dobir]

Geex the seat looks great..and it will be something only you have!

 

[Summitric]

Here's My List:

-rear Freedom Axle(offset Axle)
-15wchain And 20t15w Top Gear
-perf Brake Rotor(warranty Part)
-secondary Floater(duck)
-dynamo Joes Clutch
-timbersled Fresh Air Filter & Intake Kit
-remove Sway Bar?
-jaws Twin Pipes
-boondocker Efi Control Box
-polish Tunnel
-replace Taillite And Rear Rack With Led Lite?
-handlebar Riser
-sidepanel Vents
-dyno Test And Set-up?
-digitron?

Gonna Get A Good Start On This List This Weekend!!!

 

[catzuki]

mine just went in for the first service and a clutch update. i doubt it will fix it though. I told them not to do the reflash(it de-tunes the motor). Then once i have my next days off, im gonna start to fab up my turbo kit for the XRS. But it wont be done until next year.