Help with skidoo brake master cylinder

[Dutchman]

Buddy has a 2009 Summit X with brake problems. He needs a master cylinder assembly. Honestly never knew these wore out.
So what's our best option for a replacement?
Can we rebuild it?
Order new from dealer for too much $$$ and a week delivery time.
Or any place in central Alberta to find used stuff?
thanks

 

[Bnorth]

@catmando on here is always parting out sleds I imagine he has one around in Edmonton.

 

[SUMMIT TREE]

Is it actually toast or did it get upside down and full of air?

 

[lilduke]

They do wear out, i just changed one out a couple weeks back.

 

[Dutchman]

Is it actually toast or did it get upside down and full of air?

First time moving for a year, and it started with a squishy lever and had no brakes.. The fluid was all contaminated, removed assembly, cleaned the reservoir and hose and it will not pump/pressure up any fluid.
Now silly question, pumping the lever should get fluid moving out the hose correct? No different than bleeding brakes on the car?

 

[Outdoors]

First time moving for a year, and it started with a squishy lever and had no brakes.. The fluid was all contaminated, removed assembly, cleaned the reservoir and hose and it will not pump/pressure up any fluid.
Now silly question, pumping the lever should get fluid moving out the hose correct? No different than bleeding brakes on the car?

They are bled backwards from a car,use a big syringe from the brakes till no bubbles

 

[SUMMIT TREE]

Pump living bejeepers out of the brake lever. If that doesn’t work ive had success zip tying the brake lever down over night.

Just remember air bubbles want to go up. Most likely air locked. If you took the master cylinder completely apart be positive it’s assembled right.

 

[catmando]

I Doo have a master cylinder if needed