etec pin weights

[sick1]

Does anyone know what the stock pin weigts are for 2011 etec 800 with 163 track? Thanks...

 

[Caper11]

Does anyone know what the stock pin weigts are for 2011 etec 800 with 163 track? Thanks...

13.7 grams assuming there is still the 12 mm set screw in there.

 

[Canadian JR]

Should be 13.7 but you will find this too light if you ride 7000 ft and lower. With the stock secondary and the stock 160-350 primary spring you will want to gear it down to 19- 49 and set the pin weight at 14.7 grams on clicker #3.

If you want to wake your sled up get DJ's new D2 helix. Stocks ok if you don't ride in the steep and deep.

 

[fredw]

with a ypipe and tighter can you will need to add 6.7 grams for below 8000 feet to bring clickers down to 3 after breakin