Estart 2012-2015 etec...Help!

[catmando]

First of all is the estart on a 2012 etec the same as a 2015 etec T3 , I’m assuming so, second there is a wire for the starter switch( pink one in pic ) Apparently I’m told there is a dummy plug as well that goes too the solinoid, I cant find it. School me! Thx.

 

[Ricki Bobby]

I can’t say for sure, but I put the one off my 2010 and put it on my 15

 

[catmando]

Another pic, the pics are both my T3
Found a deal on an estart and just want too be sure before I buy it , thx

 

[pfi572]

Does this one just pull out ? Plug into it ?

 

[catmando]

I looked at it but thought I would ask , my luck I start pulling plugs I will break **** lol
I can try for sure , you think that might be it?

 

[catmando]

I can’t say for sure, but I put the one off my 2010 and put it on my 15

I’m thinking it will work, I was told they don’t sell the harness separately for the ones that are not already wired for e stsrt

 

[tex78]

This is my 14 xmx that did not come with e start

I got a used kit and installed

The plug there plugs into the solenoid

Will need the 2nd fuse holder and wire it to battery feed post on solenoid

 

[tex78]

Here is pic of that,

 

[tex78]

Does this one just pull out ? Plug into it ?

That's the buds computer plug In

 

[Ricki Bobby]

You’re more than welcome to come to my place and take a look at mine for reference if you like. Shoot me a pm

 

[catmando]

Well does it look like I’m missing anything, looked at the sled and still not sure if it has the wiring harness with the ends they connect too the starter

 

[TROLLCAT]

ring gear and a battery

 

[tex78]

Well does it look like I’m missing anything, looked at the sled and still not sure if it has the wiring harness with the ends they connect too the starter

Yup extra fuse holder and wire from it to solinoid

 

[Ricki Bobby]

Yup extra fuse holder and wire from it to solinoid

This^^^

 

[catmando]

ring gear and a battery

Ring gear is in my sled already, didn’t come with battery, thx

 

[catmando]

Yup extra fuse holder and wire from it to solinoid

I was hoping that wire would be install from factory, why would do install a ring gear and not the wire, I do have an empty fuse holder, can’t seem too find a wire in my sled though, thought it might be hidden in there somewhere cause do don’t sell that wire separate....fml

 

[catmando]

Here is the empty fuse holder on my sled right close to where the battery would sit

 

[tex78]

Yes the fuse holder is empty, you need the pins to slide in and latch, that the fuse slides into open prongs

Or just use a aftermarket fuse holder and zip tie it to the empty one

25 Amp fuse goes in

Lyle if ya need I can look where the one wire goes to below the used fuse holder

 

[catmando]

Yes the fuse holder is empty, you need the pins to slide in and latch, that the fuse slides into open prongs

Or just use a aftermarket fuse holder and zip tie it to the empty one

25 Amp fuse goes in

Lyle if ya need I can look where the one wire goes to below the used fuse holder

That would be great, wiring certainly isn’t one of my strong points lol

 

[tex78]

That would be great, wiring certainly isn’t one of my strong points lol

P. M me and remind me tonight