Jan 16, 2023 #1 Heavybrewster Active member Joined Mar 23, 2016 Messages 112 Reaction score 142 Location Regina Has anyone hooked up a pulley system or a winch to lift up back of sled inside a trailer?
Jan 16, 2023 #2 adamg Active VIP Member Joined Mar 8, 2011 Messages 3,451 Reaction score 4,662 Location S'toon,SK The guy that works on sleds full time in a trailer in Revelstoke, has that setup.
Jan 31, 2023 #3 Z Zrock Active VIP Member Joined Aug 26, 2014 Messages 597 Reaction score 906 Location BC you would have to do some serious reinforcing on the roof with some supports going to the floor. Roof and structure are alum and not allot of support
you would have to do some serious reinforcing on the roof with some supports going to the floor. Roof and structure are alum and not allot of support
Jan 31, 2023 #4 L Lem Lamb Active VIP Member Joined Apr 5, 2010 Messages 3,708 Reaction score 6,724 Location Lacombe AB Oh heavens no... Attach the winch to the tin roof with pop rivets and your good too go... Everyone over engineers stuff They got away with way less engineering back in the chuck wagon days when they used block and tackle with corn stock rope... No one was growing pot back then so hemp rope was not an option... Mind you they weren't lifting the back end snowmobiles since they weren't invented yet...
Oh heavens no... Attach the winch to the tin roof with pop rivets and your good too go... Everyone over engineers stuff They got away with way less engineering back in the chuck wagon days when they used block and tackle with corn stock rope... No one was growing pot back then so hemp rope was not an option... Mind you they weren't lifting the back end snowmobiles since they weren't invented yet...