Do we have clearance, Clarence?

Walleyehunter

Active member
Joined
Sep 20, 2011
Messages
54
Reaction score
39
Is there enough clearance on the Pro RMK to put on a 3inch track or do you need to install the Avid chaincase like on the Summit? This could be a deal breaker for me and the Summit. If I could get the Pro and throw a 3inch on without dropping the chaincase then I think that might be the way to go. I know you can just run smaller drivers but I'm not sure how efficient that would be.
 

kidder17

Active VIP Member
Joined
Mar 11, 2008
Messages
484
Reaction score
613
Location
Saskatoon
Is there enough clearance on the Pro RMK to put on a 3inch track or do you need to install the Avid chaincase like on the Summit? This could be a deal breaker for me and the Summit. If I could get the Pro and throw a 3inch on without dropping the chaincase then I think that might be the way to go. I know you can just run smaller drivers but I'm not sure how efficient that would be.
You will need the Avid drop kit to run the 3" on the Pro RMK.
 

Walleyehunter

Active member
Joined
Sep 20, 2011
Messages
54
Reaction score
39
I figured as much but wasn't sure. I guess I could've just called Specialty and they could've told me. At least if you perform this mod on a Summit you don't need to trim the track. Thanks. ch!t, in a couple years they'll be coming stock with a 3 and everyone will be installing a 4.
 

Walleyehunter

Active member
Joined
Sep 20, 2011
Messages
54
Reaction score
39
Anyone done this mod themselves? It's spendy to get ken to do it. How hard is it though really?
 

kidder17

Active VIP Member
Joined
Mar 11, 2008
Messages
484
Reaction score
613
Location
Saskatoon
Anyone done this mod themselves? It's spendy to get ken to do it. How hard is it though really?

Head on over to the Polaris Pro section and start searching there. Chrisco(Parkland Motorsports) on here may be another option for you as well.
 

Walleyehunter

Active member
Joined
Sep 20, 2011
Messages
54
Reaction score
39
Well you do or you don't I guess. I know a guy who put smaller drivers on his but I'm not sure how efficient that's going to be.
 

whickey

Active member
Joined
Jan 26, 2007
Messages
100
Reaction score
7
Location
Edmonton
Call Chris with Parkland. I don't know about price but I can tell you the work is worth it. He has done lots of stuff with 3". 780-963-0080
 

thegeneral

Active VIP Member
Joined
Nov 21, 2009
Messages
2,158
Reaction score
2,596
Location
Stony Plain, Alberta
Well you do or you don't I guess. I know a guy who put smaller drivers on his but I'm not sure how efficient that's going to be.

The Only people that benefit from putting the 3" avid chaincase on a Summit are Avid and the shop that installs it. There is plenty of clearance with the 7 tooth drivers and they are only around 9% smaller than the stock driver, which can be easily compensated for in the gearing.
I have 1100 miles on my 08 with this set up and it works VERY well.
IMHO
 

rsaint

Active VIP Member
Joined
Dec 2, 2007
Messages
1,811
Reaction score
1,086
Location
Whitecourt
Is there enough clearance on the Pro RMK to put on a 3inch track or do you need to install the Avid chaincase like on the Summit? This could be a deal breaker for me and the Summit. If I could get the Pro and throw a 3inch on without dropping the chaincase then I think that might be the way to go. I know you can just run smaller drivers but I'm not sure how efficient that would be.
You are worried about efficency then leave it stock that is how they engineer them. Drop the size of your drivers then drop your gearing to compensate.
 
Top Bottom