Couple of new sleds

[SLY]

Gotta love them Yami's

 

[SLY]

More pics as the transformation progresses

 

[Grizzly4323]

You guys are off to a good start. Not much left of the new sled. Too bad a guy can't get them like that from factory. looks like you have a 3" track there. You got the D&R figured out?? I'm sure they will both look good. Gett'm finished and lets go ridin!! Cheers..

 

[SLY]

That's a 2-1/2 on that one but here's a 3" that we might squeeze on the other one. The old guy needs all the help he can get ;-)

 

[SLY]

This is actually Tapex's new ride. His computer is gettin' fixed right now so he can only get on here at work. It's coming along nicely, just needs a few final touches.

 

[tmo1620]

Very nice:d

 

[maxwell]

174?

its good your building these your other rides were such beaters

 

[SLY]

Gotta keep up appearances you know Had just done a couple of nice upgrades to the other sled as well. Thought we would give 174's a whirl this time around. Just waiting on Timbersled and CR so we can finish the other one.

 

[maxwell]

cool. how come the motors out of this one? top secret?

also how come you started with the 162 is it not more expensive to begin with if your already replacing the tunnel?

do you have a graphics kit like your other ones? that was cool

 

[modmanmike]

I like the new look! When i come to town I want to check those bad boys out!!! Its about time you got some new sleds!!! :d

 

[Got boost want snow]

Really nice, awesome looking sleds

 

[Rucky]

cool. how come the motors out of this one? top secret?

also how come you started with the 162 is it not more expensive to begin with if your already replacing the tunnel?

do you have a graphics kit like your other ones? that was cool

They're clearly hurtin' for cash..... :d

What does make sense to me is perhaps 162" take off parts are more desirable?

 

[maxwell]

i didnt say they were poor but no one likes to spend extra cash unless theres a reason. and your probly right lots of people want to swap to 162

 

[Redturbo]

Reason motor has to come out, yamaha puts that chain tensior on the back side of the engine. As with the pump gas mcx kit, thicker headshim needs to go in. Unless there putting in rods/pistons.

 

[Beaver]

did you sell you otherone Sly

 

[SLY]

cool. how come the motors out of this one? top secret?

also how come you started with the 162 is it not more expensive to begin with if your already replacing the tunnel?

do you have a graphics kit like your other ones? that was cool

Motors out for a headshim, not doing any internals.

162 is not a lot more and more demand for takeoff parts.

Limenine is doing a couple of graphics kits for these.

 

[SLY]

did you sell you otherone Sly

Yes. That sled sure ran and performed well. Was just a little over 600lbs full of fuel with the oversize tank. Don't think I'll get the new one down to that as the track is heavier but should work pretty good once dialed in.

 

[tapex]

Yay, computer is fixed.....well replaced . Not too much left to do to the sled now. Get in seat, make it fit and install decals when they arrive! All this snow.....I dont think the sled can be done fast enough:d:d:d

 

[malinowski3]

i think thos cr tunnels are so nice :d :d i saw one that wasnt the blue or red at the mountains a couple of weeks ago .... i think after i get out of school im gonna need to do a turbo build

 

[mach123]

Nice sleds guys, good luck with the snow.