347strokin
Active VIP Member
Hey guys,
I recently picked up a 13' Sibler TM800. Went out for my first rip yesterday. With the boost turned down all the way, I was still pulling around 5lbs of boost and revving at around 8300rpm under load at about 6000ft elevation. I'm looking to drop around 600 or 700 rpm as I can turn the boost up anytime to maintain rpm after that. Does this sound reasonable?
Anyways, I pulled the clutch weights and weighed them out at 80 grams each. What do you guys recommend for a weight increase and where would you put the most weight? On the toe or heel? And how does this affect the performance? I've got the Rooster adjustable clutch weight kit so I have the option to add weight top/middle/bottom of weight.
Also does anyone throw a touch of grease on the clutch bolts so they slide a bit easier through the clutch weight?
Thanks!
I recently picked up a 13' Sibler TM800. Went out for my first rip yesterday. With the boost turned down all the way, I was still pulling around 5lbs of boost and revving at around 8300rpm under load at about 6000ft elevation. I'm looking to drop around 600 or 700 rpm as I can turn the boost up anytime to maintain rpm after that. Does this sound reasonable?
Anyways, I pulled the clutch weights and weighed them out at 80 grams each. What do you guys recommend for a weight increase and where would you put the most weight? On the toe or heel? And how does this affect the performance? I've got the Rooster adjustable clutch weight kit so I have the option to add weight top/middle/bottom of weight.
Also does anyone throw a touch of grease on the clutch bolts so they slide a bit easier through the clutch weight?
Thanks!
Last edited: