Clutch Weights/ RK Tek

Linkz

Active VIP Member
Joined
Dec 14, 2006
Messages
298
Reaction score
0
Location
Calmar,alberta
I purchased and installed the RK Tek secondary clutch and changed its spring to a Cat red/white. What weights do I need in the primary?, is anybody running this clutch in a 2008 M8? I realize weights need to be done on the hill I was just looking for a place to start. Also, the instructions say to change the "forward rollers" Which are these? If u were looking at the clutch in the sled and one set of rollers was at the top, would it be the left or right ones? As you can tell Im totally clueless when it comes to clutching!!
 

glengine

Active VIP Member
Joined
Jan 1, 2008
Messages
3,724
Reaction score
1,160
Location
Smithers, B.C.
Your primary clutching should be just fine as long as you've put the weights in that slp recommended.. It'll be a good starting point for you..the forward rollers are the ones that will be taking the most pressure should be the opposite side as the notch in the ramp.. To make sure you will probably notice that one set of yor stock rollers in youir sec will look like they are used more persay, these are the ones that you want to change..
 
Top Bottom