changing weights on the mountain

[Kushniruk_16]

Hey just wondering if anyone knows a way or has changed weights on the mountain? is it do-able? if so how do you guys do it? what tools and procedures etc

 

[DiggsNWt]

Hey just wondering if anyone knows a way or has changed weights on the mountain? is it do-able? if so how do you guys do it? what tools and procedures etc

Very easy to get done. Small pry bar to close primary clutch, 8mm wrench, and allen wrench to remove pin. Loosen pins with wrenches. Remove belt. Open clutch with pry bar, wedge bar against lower part of belly pan to keep clutch open. Pull pin, remove weight, drop in new weight, replace pin, tighten, unwedge pry bar, go to next weight. Under 15 minute job when you have done it a few times.

Diggs

 

[Beels]

I just yank the end cover bolts, then you don't have to worry about losing the ends of your fingers.

 

[tavis43]

X2 same on my cat

I just yank the end cover bolts, then you don't have to worry about losing the ends of your fingers.

 

[duck]

Very easy to get done. Small pry bar to close primary clutch, 8mm wrench, and allen wrench to remove pin. Loosen pins with wrenches. Remove belt. Open clutch with pry bar, wedge bar against lower part of belly pan to keep clutch open. Pull pin, remove weight, drop in new weight, replace pin, tighten, unwedge pry bar, go to next weight. Under 15 minute job when you have done it a few times.

Diggs

Polaris makes a special tool for this.....see parts counter.

 

[Summiteer]

Get Dalton adjustable weights. All you have to do is remove or add set screws to each weight with an allen wrench. Easy peasy

 

[OnlyPolaris]

Buy the SLP clutch clamp. Its like 10 bucks. 3/8 wrench and 8mm allen wrench. take belt off, pry clutch open and put clamp on. change wieghts and put belt back on.

 

[RUDY]

Pretty simple,pry open with bar,insert socket to prevent from closing...remove weight and put different one in..The bar I use is small enough I can pack with with me..