gibsons
Active VIP Member
so i noticed last night some small pieces of metal when i changed my diamond drive oil so i decided to pull it apart and found all the bearings appear to be ok however some of the gears are chipped. the sled is an 07 M8 with speedwerx exaust v force reeds, boondocker controler, some mild porting and the previous owner figured it was pushing 160-165 h.p. the factory gearing appears to be 57t/63t on this year, and 55t/65t on the 2010 m8's and 60/60 on m1000's. my question is would i be able to run either one of these other diamond drives and what difference would it make on my sled?
Last edited: