Chainsaw Mounts for front/back of a quad and sled

[Ministik Man]

Just bought the Stihl 211 chainsaw 16" blade and would like to know if there are any mounts out there.

Do you know of any mounts that just bolt up to these machines
1 - 2010 Can AM 650 Max
2 - 2011 Summit 149" track

Getting tired of the one handed trick holding the saw...

Thanks

 

[the_real_wild1]

I have a koplin saw press on the front of my grizzly that works really well. Not sure if I would want to drill holes in my sled to mount it though. Maybe do the mount on the quad and use a quad bag on the sled for the saw.

 

[Sledderglen]

Brian I mounted a 4x6 beam onto a piece of plywood and then cut a slot into the beam to hold and cover the chain. Lock it to rack with screws and hold the saw to the plywood with a small strap. Little redneck but cheap. I have seen your woodworking abilities on the Marathon tub trailers I think you could do a excellent job. Want to make me one also ?

 

[Mongrol]

I built this one for under $10.00 for 16" bar.

2 pieces 1/2" plywood
1 1" electrical "U" clamp
2 eyebolts, 1/4 x 4 1/2"
and a few wood screws

 

[byronkentgraham]

I built this one for under $10.00 for 16" bar.

2 pieces 1/2" plywood
1 1" electrical "U" clamp
2 eyebolts, 1/4 x 4 1/2"
and a few wood screws

I was trying to look up grizzly width with tracks for another threads and found you on trackshare.com


Checck this out. should work
Kolpin ATV Saw Boot | Bass Pro Shops