Can a 154 track be used on a 156 skid

boondocker14

Active member
Joined
Mar 27, 2008
Messages
26
Reaction score
0
Location
C.N.P
Hey. I have a 156 skid on my sled. Its a 2002 RMK 800 snow check and I was wondering since 156" tracks are hard to find will the 154x16 fit under my sled with the track tension loosened off. Any info would be great thanks.
 

tekim

Active VIP Member
Joined
Oct 23, 2006
Messages
699
Reaction score
267
Location
Rosalind, AB
I'm no expert on this, but the difference between a 154 and 156 is 2", which basically is 1" on the top, and 1" on the bottom. If you have more than 1" of adjustment for the shorter track, then you should (might) be ok.

tekim :D
 

Ancient Sledder

Active VIP Member
Joined
Feb 21, 2008
Messages
675
Reaction score
95
Location
Onoway Alberta
Pretty sure the 154 track is 2.86 pitch and the 156 will be 2.52 or 3.00 pitch. I don't think it will fit without a driver change.
 

boondocker14

Active member
Joined
Mar 27, 2008
Messages
26
Reaction score
0
Location
C.N.P
I totally forgot about the pitch. I was going to go to a 159 and just move my suspension back but those tracks are also apparently rare. Might just have to drop on a 162.....seems to be an abundance of them
 

rmk800

Active VIP Member
Joined
Nov 10, 2006
Messages
332
Reaction score
2
Location
whitecourt
i would phone your local polaris dealer for the series iv 159" track. they have some pretty good deals on them or order from camoplast for $425 us for the 2 1/8" paddle model
 

Ancient Sledder

Active VIP Member
Joined
Feb 21, 2008
Messages
675
Reaction score
95
Location
Onoway Alberta
I went to the sled show in Edmonton looking for a longer track to replace my 151. Could not find one with the 2.52 pitch. I was told everyone was changing to 3.00 tracks and I'd better get on board. Maybe I will.
 
Top Bottom