Altitude Setting-Meter to Feet

RUDY

Active VIP Member
Joined
Nov 25, 2008
Messages
1,087
Reaction score
187
Location
Fort Saskatchewan, Alberta, Canada
the altitude setting is in meters,how can i change it over to feet?...I read and says call Doo dealer but thought i'd ask here first to see if anyone know.Thanks
 

Modman

Active VIP Member
Joined
Mar 13, 2008
Messages
6,009
Reaction score
8,340
Location
Castlegar
the altitude setting is in meters,how can i change it over to feet?...I read and says call Doo dealer but thought i'd ask here first to see if anyone know.Thanks

I thought there was a plug on the back that you just had to switch the input?

here are the rough values as a reference guide in case you don't get it converted.

500 m = 1500 ft
1000 m = 3000 ft
1500 m = 5000 ft
2000 m = 6500 ft
2500 m = 8200 ft
 

sledderdoc

Super Senior Member
Joined
Jan 12, 2009
Messages
15,161
Reaction score
850
Location
Wabamun
I thought there was a plug on the back that you just had to switch the input?

here are the rough values as a reference guide in case you don't get it converted.

500 m = 1500 ft
1000 m = 3000 ft
1500 m = 5000 ft
2000 m = 6500 ft
2500 m = 8200 ft

Used to be a plug but now it must be done by the dealer as stated. They said it takes about 20min. When I took my sled in for the 500km service Ecko was good enough to do it for free.
 

steel town

Active VIP Member
Joined
Nov 24, 2009
Messages
650
Reaction score
103
Location
calgary
A BRP dealer has to pug it into BUDDSs to change it for you....while your at it get an extra dess key programmed and they will usually just charge you for that....
 
Top Bottom