Aftermarket running boards

[lewey]

Contemplating trying some aftermarket boards on my 16 ltd, not that I have any issues with the stockers. What are your guy's experiences? Preferences? Lot of guys on SW going off about these ones.

https://bmfabrications.com/collections/arctic-cat/products/arctic-cat-pro-climb-skinny-boards

obviously once you hack it, you can't go back so not sure if it's worth it lol

 

[Vertical-Extreme]

Those are the best ones available right now!

 

[Jjanke]

The BM fab skinny boards are the best option out there right now. Very straight forward install and you will not regret them.

 

[Bozo]

You guys think the new boards Cat is offering in the '17 catalog are worthy??...or the BMFab are still the best way to go?

 

[YamaDad]

If you are in Edmonton I had some Bruno boards made and installed by the Sledshop. Totally fabricated so he can make what you want. Makes the TPHAZER one of a kind. I can't seem to post pictures but check out their Facebook page. The Phazer is blue.

Sent from my SM-G900W8 using Tapatalk

 

[AGGRESIVEZEBRA]

By far the best board i have have seen for the Proclimb model are the Racewerx ones. they are expensive but you do not need to cut anything juts pull some rivets and bolt up. they dont have them on there website yet but saw them at the sled show. they have multiple different stud styles and seem super easy to install no taping or anything. https://www.google.ca/search?q=race...=a7XYVpD6A4-0jwORuaegDQ#imgrc=sY7a6OnnF7qUOM:

 

[ThrottleOps]

The b&m skinny boards are the go to boards if your interested in sucking your plastics in so you can actually utilize your 36" front end


Sent from my iPhone using Tapatalk

 

[lewey]

pulled the plug on the b&m's tonight. guess we'll see how they are

 

[ThrottleOps]

Are you going to suck your plastics in during the install? There's a ton of info on this on snowest if your interested


Sent from my iPhone using Tapatalk

 

[lewey]

Think I'll give it a go. We'll see how side panels seal up though

 

[ThrottleOps]

Sounds good post your results if you don't mind!


Sent from my iPhone using Tapatalk

 

[Dawizman]

Anyone have experience with the airframes? I can get a set for $400, wondering if it's worth it?

 

[crossfire879]

Are the skinny boards noticeably skinnier? I can't imagine having my feet on anything much narrower than the stock boards.

Sent from my SM-G903W using Tapatalk

 

[ThrottleOps]

Are the skinny boards noticeably skinnier? I can't imagine having my feet on anything much narrower than the stock boards.

Sent from my SM-G903W using Tapatalk

The point of the skinny boards are so you can suck in the belly pan and side panel plastics, a huge improvement when running a 36" front end


Sent from my iPhone using Tapatalk

 

[Sparky's]

I have the skins air frames, Rasmussen style and love them.