99 Summit 670x Suspension

[kylemckay69]

I have a 99 Summit 670x and the back suspension is shot. Its always bottoming out over the smallest bumps. I need some ideas on what to do? Ive heard that a sc-10 II will bolt right on. Does anyone know about this?

 

[maxwell]

not sure about it bolting right in. but it will fit might just have to relocate the rear mounts thats all.

but why not just upgrade your current suspension.

replace the rear coils with maybe some heavier ones from a 2-up sled.

check and inspect the shocks and have them rebuilt/replaced

 

[Summitric]

not sure about it bolting right in. But it will fit might just have to relocate the rear mounts thats all.

But why not just upgrade your current suspension.

Replace the rear coils with maybe some heavier ones from a 2-up sled.

Check and inspect the shocks and have them rebuilt/replaced

i agree with maxwell..... Why not just upgrade to new/better components? Would be cheaper in the long run....... Check out the royal distributing website, or the recreation supply website.

 

[99summitx]

Agree, I put torsion springs from a 04 summit and a RydeFX shock on and made a huge improvement. Also added a couple inches to the drop brackets for clearance.

 

[kylemckay69]

do the torsion springs from an 04 summit fit with no modification?