800 summit e start issues

prudens point

Member
Joined
Apr 5, 2010
Messages
24
Reaction score
36
Location
Saskatchewan
Sled worked fine all day.
At end of day there is no e start or reverse.
Button seems to depress like it should.
Is there a fuse for this switch?
Thanks
 

prudens point

Member
Joined
Apr 5, 2010
Messages
24
Reaction score
36
Location
Saskatchewan
Got it.
The 5 amp fuse by the battery looked fine but I changed it and now reverse and e start both work.
 

PS94

Active VIP Member
Joined
Feb 11, 2009
Messages
358
Reaction score
194
Location
Grande Prairie
I was coming in to post that....my 5A looked absolutely fine....but was blown?! ended up taping a couple spare to the glove box lid so I can hand em out or use em if I need to!
 

Team Pigeon

Active VIP Member
Joined
Oct 31, 2007
Messages
265
Reaction score
362
Location
Pass Creek.
Ok so on mine, I'd pull out the stop button and it would start. Push button down and it stops. Pull the key, it stops. Reverse not working. So I rode like that for the day. Next day, battery is dead. Had to pull start to run. Reverse didn't work either.

Going to check the 5amp and bar harness I guess.

Update Feb 19-2015; 5amp fuse blown. Dropped off at Bow Cycle south, they claim the rer/start/reverse switch was shorted out.
 
Last edited:

Bernoff

Active VIP Member
Joined
Mar 11, 2010
Messages
1,382
Reaction score
1,338
Location
Edmonton
I was coming in to post that....my 5A looked absolutely fine....but was blown?! ended up taping a couple spare to the glove box lid so I can hand em out or use em if I need to!

x2 carry extra now Mine looked fine too
 

kimrick

RIP Fellow Sledder
Joined
Nov 28, 2009
Messages
2,236
Reaction score
6,304
Location
In Heaven & Revelstoke
I agree.
After seeing this post, my handlebar back now has an extra fuse also.

Good point raised and good info... Thanks folks.
 
Top Bottom