670 idle

[summitkid600]

i was wondering what the 670's are suposed to idle at

 

[Summitric]

i was wondering what the 670's are suposed to idle at

they like to idle at about 2000 rpm's.... But i think spec is 1800 +/- 200 rpm's.

 

[posnick]

the manual says 1700 +/- 200 but on mine 1500 is too low. i like it at 18 or 1900

 

[summitkid600]

ya thats what i thought mine was idle at like 3200 so i had the shop turn it down and they had to adjust the cables now it idles at 1800 but will only go to 6500 and has like no power, and my neighbours idles at 3200 also so i wasnt sure if i should turn it back up again

 

[Modman]

ya thats what i thought mine was idle at like 3200 so i had the shop turn it down and they had to adjust the cables now it idles at 1800 but will only go to 6500 and has like no power, and my neighbours idles at 3200 also so i wasnt sure if i should turn it back up again

If this is during warm up then do not adjust it, it will eventually idle down once it warms up.

You shouldn't have to adjust the cables to change the idle, just the idle screw...

 

[posnick]

you sure the carbs are opening all the way at WOT

 

[Deano670]

you sure the carbs are opening all the way at WOT

They wont be now with the cables adjusted to lower the idle.

 

[dooryder]

why would the shop adjusts the cables? you just turn the screws down on the carbs? now its probally open the carbs half way

 

[summitkid600]

it would idle this high all the time, the idle screws didnt adjust it at all, so they had to adjust the cables

 

[renegade x]

it would idle this high all the time, the idle screws didnt adjust it at all, so they had to adjust the cables

If thats the case it has the wrong cable on it