2011 everest gauge problem

rotormech

Active VIP Member
Joined
Dec 18, 2007
Messages
685
Reaction score
286
Location
grande prairie
so im cruising along the groomed trail and my gauge cluster freezes up and loose my milige readings.stop,shut down fire back up works fine all day wtf?
 

CUSO

Active VIP Member
Joined
Jan 21, 2007
Messages
4,771
Reaction score
5,522
Location
Edmonton
It's most likely your digital counter in your chaincase. I had mine replaced under warranty. You can check the plug that goes into the chaincase cover. Does the tach work?
 

rotormech

Active VIP Member
Joined
Dec 18, 2007
Messages
685
Reaction score
286
Location
grande prairie
tach and speedo froze,and lost the led readouts,worked fine after that all day through deep pow, jumps and all
 

CUSO

Active VIP Member
Joined
Jan 21, 2007
Messages
4,771
Reaction score
5,522
Location
Edmonton
might be a plug, Moisture, like lots of powder can do a lot of havoc on electronic connections.
 

Cowboy151

Active member
Joined
Dec 7, 2008
Messages
67
Reaction score
0
Location
Camrose Ab
I would suspect moisture in the guage cluster. Pop it out of the upper console and put it in a bowl of rice. Thats right rice, it will take all the moisture out within 24 hours. No worries of too much heat or melting stuff . Cheers
 
Top Bottom