Anyone have an alignment procedure? Replacing the front tie rods at the moment. Also is this photo normal? Looks like the passenger side rod has a bend and the driver side is straight?
When I replaced the inner and out tie rods on our 2009 rzr they did not look like that.
I ordered the inner and outer out of the States.
A lot better quality than OEM.
I set mine at 0 toe in
get rid of the stock ends that screw into the steering box and replace with a set of heavy duty ones, had one of those ball ends pull out polaris wants about 190 for replace with the same. the heavy duty ones use u joints there is no way they will break and they are half the price. go to side x side sports web site and go to polaris razor then steering or suspension. there easy to install and it gets rid of that loose fell from the loose ball moving hope that helps