2004 Rev primary clutch

Mattjames

Active member
Joined
Nov 25, 2012
Messages
49
Reaction score
16
Location
Langdon
Hey guys,

If I pull my clutch bolt out can I take the sliding half of the clutch off without pulling the hole thing? Or do I have to pull both pieces with a clutch puller so they will come apart?
 

Barker

Active VIP Member
Joined
Jan 2, 2012
Messages
731
Reaction score
861
Location
AB/MT
Sometimes it takes a bit and you might not get it. I have had to in the past pull it with the clutch puller then leave puller in and throw it down on the puller head onto floor to crack it apart.
 

Twacked

Active member
Joined
Mar 21, 2012
Messages
39
Reaction score
34
Location
Shuswap
Sometimes it takes a bit and you might not get it. I have had to in the past pull it with the clutch puller then leave puller in and throw it down on the puller head onto floor to crack it apart.
Yup X 2
 

farmerboy

Active VIP Member
Joined
Mar 12, 2011
Messages
320
Reaction score
147
Location
Cremona Alberta
Sometimes it takes a bit and you might not get it. I have had to in the past pull it with the clutch puller then leave puller in and throw it down on the puller head onto floor to crack it apart.

Yep x3 Do not hit on the end of the puller to "break it loose" Very bad
 
Top Bottom