2004 custom built rev for sale

[Dmf]

2004 custom built Rev

2004 skidoo 800 HO
sled has a 163" skid out of a XP (powder coated black and orange)
163" by 2 1/4 track non ported off a 2011 XP
8 tooth Avid drivers
custom built tunnel with snow flap and bumper (powdercoated black)
Kerman tapered bars (orange carbon fibre wrap)
Fly Racing risers (powdercoated black)
CR Racing billet throttle block
hand warmers/hi lo switch/ and reverse rewired like the XRS sleds
simmons skis
frog skin vent kit (clutch side)
front suspension is powder coated orange with black spindles

The sled has a total of 2826 mi, but the motor has been rebuilt at 2566mi. (new crank from BRP and two new pistons) only reason for this is its not worth re greasing bearings on the crank, rather just but a whole complete crank in.

This motor is not stock. Modifications include clyinder porting, stock head shaved to 14 to 1. The timing is fully advanced. This motor makes 160 HP at 106 ft lbs of torque. Dynoed at The Mod Shop, and have the dynoed sheets to go with it. Stock single pipe with an MBRP can. Full stock air intake too. You must run AV gas in this sled, and the oil injection is still on it. If you want a reliable sled with good power, this is it. asking 7700

please call after 6 pm 780 402 4658

please not ported track in theres pics, has the non ported on now​

 

[Circled-Mistake]

2004 custom built Rev

2004 skidoo 800 HO
sled has a 163" skid out of a XP (powder coated black and orange)
163" by 2 1/4 track non ported off a 2011 XP
8 tooth Avid drivers
custom built tunnel with snow flap and bumper (powdercoated black)
Kerman tapered bars (orange carbon fibre wrap)
Fly Racing risers (powdercoated black)
CR Racing billet throttle block
hand warmers/hi lo switch/ and reverse rewired like the XRS sleds
simmons skis
frog skin vent kit (clutch side)
front suspension is powder coated orange with black spindles

The sled has a total of 2826 mi, but the motor has been rebuilt at 2566mi. (new crank from BRP and two new pistons) only reason for this is its not worth re greasing bearings on the crank, rather just but a whole complete crank in.

This motor is not stock. Modifications include clyinder porting, stock head shaved to 14 to 1. The timing is fully advanced. This motor makes 160 HP at 106 ft lbs of torque. Dynoed at The Mod Shop, and have the dynoed sheets to go with it. Stock single pipe with an MBRP can. Full stock air intake too. You must run AV gas in this sled, and the oil injection is still on it. If you want a reliable sled with good power, this is it. asking 7700

please call after 6 pm 780 402 4658

please not ported track in theres pics, has the non ported on now
​

SURE WOULD LIKE TO BUT THE STENCIL FOR YOUR TUNNEL SIDES YOU GOT IN THE BACKGROUND.......LOL Nice sled tho man, gots an 06 and cant get rid of her, too good of a sled!!!

 

[Circled-Mistake]

SURE WOULD LIKE TO BUT THE STENCIL FOR YOUR TUNNEL SIDES YOU GOT IN THE BACKGROUND.......LOL Nice sled tho man, gots an 06 and cant get rid of her, too good of a sled!!!

SURE WOULD LIKE TO BUY THE STENCIL FOR YOUR TUNNEL SIDES YOU GOT IN THE BACKGROUND.......LOL Nice sled tho man, gots an 06 and cant get rid of her, too good of a sled!!!

 

[Dmf]

SURE WOULD LIKE TO BUY THE STENCIL FOR YOUR TUNNEL SIDES YOU GOT IN THE BACKGROUND.......LOL Nice sled tho man, gots an 06 and cant get rid of her, too good of a sled!!!

thanks man, cheers!
make a road trip to grande prairie this fall and get it done?

 

[Circled-Mistake]

thanks man, cheers!
make a road trip to grande prairie this fall and get it done?

Something to think about for sure!!!!!!!!!!!!!!!!!! Its just a plate you rivet over existing tunnel right???? Cut away where original rear arm mount bracket is and machine new drop bracket in the plates??? Loos kool for sure tho!!!!!!!!!!!!!

 

[Dmf]

Something to think about for sure!!!!!!!!!!!!!!!!!! Its just a plate you rivet over existing tunnel right???? Cut away where original rear arm mount bracket is and machine new drop bracket in the plates??? Loos kool for sure tho!!!!!!!!!!!!!

yupp exactly right