'10 800 RZR low range

[alberta chad]

Transmission continues to pop out of low range when using. Once does, there is a nasty grind as expected. Stop, put back into low range, works good until it pops out of gear again. No problems in high range. All gears work well, just pops out of only that low range.
Thoughts?


Sent from my iPhone using Tapatalk

 

[papajake]

bent linkage or your belt needs to be replaced

 

[neilsleder]

I don't think you belt would cause that. I could see it needing to be adjusted. Pretty easy job with basic tools needed.


Sent from my iPhone using Tapatalk

 

[Lund]

Transmission continues to pop out of low range when using. Once does, there is a nasty grind as expected. Stop, put back into low range, works good until it pops out of gear again. No problems in high range. All gears work well, just pops out of only that low range.
Thoughts?


Sent from my iPhone using Tapatalk

You just need a simple shifter cable adjustment located on the side of the gear box. The low range gear is just not meshing the whole way and this causes it to come out. If your not sure how to get a repair shop to set it up......simple 2minute job.

 

[alberta chad]

Thank you. I will try


Sent from my iPhone using Tapatalk