09 xp 800r motor install

[Newfie709]

Looking for pics or help on where the lines hookup on back side of crank case I have the oil lines hooked up but puzzled with the fuel pulse line an the other 2 black ones thanks

 

[bayman]

I have pictures somewhere. I'll look around for em. Pretty sure the gas pulse goes on the middle spigot. The long cooling line is pto side if memory serves me correctly. Been a couple years since I did it. There should be pics on dootalk.

 

[mxz sledhead]

I just did mine the fuel is in middle to the right are the 2 lines that run rave valve the spig above the oil pump is the return line for oil tank the problem i had is making sure the wires for the mag has to to be position between the 2 vacuum line above the motor mount or you won't have enough wire plug in

 

[everest8]

Too late now but when I pulled my engine out I taped and marked all connections and took photo's of it all for reference. I also used ''Leaders Marine'' in Kalamazoo, Michigan as their web site has microfiche diagrams to assist and all part numbers.