08 dragon service eng. light flashing 5 times?

timbo

Active VIP Member
Joined
Dec 18, 2006
Messages
1,088
Reaction score
386
Location
edmonton
Make sure it's plugged in, if it is then you have to change it.Careful when installing it you don't want to tighten it too much or you will crack it.Probe is in the center of pipe.
 

jrdragon

Member
Joined
Dec 27, 2011
Messages
19
Reaction score
0
Location
colorado
Thanks timbo.....Do you run a power commander V on your dragon?
 
Last edited:

jrdragon

Member
Joined
Dec 27, 2011
Messages
19
Reaction score
0
Location
colorado
So your saying that It's not really necessary? I just got this sled and been reading lots of neg stuff. I love the ride of Polaris and am trying to take every precaution to keep it from blowing up!
 

timbo

Active VIP Member
Joined
Dec 18, 2006
Messages
1,088
Reaction score
386
Location
edmonton
If it wasn't necessary it wouldn't be there,you need to change it.
 

jrdragon

Member
Joined
Dec 27, 2011
Messages
19
Reaction score
0
Location
colorado
The last comment was in regards to the power commander.....temp probe in the mail..I sure do appreciate your advice.
 

timbo

Active VIP Member
Joined
Dec 18, 2006
Messages
1,088
Reaction score
386
Location
edmonton
No problem,some guys say you have to have the PCV some guys say no you don't need it.Myself I have it on with the Stoughtner map and a map with all 0's and the Polaris 08 mapping and can't tell the diff.Good luck with it.
 
Top Bottom