- Thread starter
- #21
kanedog
Active VIP Member
- Joined
- Feb 3, 2015
- Messages
- 3,141
- Reaction score
- 8,615
problem-Losing rpm@wfo. Clutches not back shifting at wfo, dragging rpm down and causing trackspin.
Solution-
Good-Drop 2 teeth on top or add 4 teeth on bottom. This is hard to do on a Polaris due to parts availability but any gear down from stock will benefit with better performance and cooler clutches.
Better-In addition to above, Rebuild clutch primary and secondary clutches, new springs and install Thunder products 911 primary clutch cover.
Best-In addition to above, Slp pipe set. Use polaris stock weights and use Slp 140/320. Sell weights that come with kit.
comments-This sled runs really nice. Unless you really need more, I would just do regular maintenance and ride!
Solution-
Good-Drop 2 teeth on top or add 4 teeth on bottom. This is hard to do on a Polaris due to parts availability but any gear down from stock will benefit with better performance and cooler clutches.
Better-In addition to above, Rebuild clutch primary and secondary clutches, new springs and install Thunder products 911 primary clutch cover.
Best-In addition to above, Slp pipe set. Use polaris stock weights and use Slp 140/320. Sell weights that come with kit.
comments-This sled runs really nice. Unless you really need more, I would just do regular maintenance and ride!
Here's my most current one, almost 3 years old now. I hardly take out my gopro anymore.
https://www.youtube.com/watch?v=Hvfmyeupi3I