LoginRegister
SnowandMud.com - Powered by vBulletin

Today's Posts
Results 1 to 10 of 10

04 800 high idle

Discuss 04 800 high idle in the SKI-DOO CHAT forums; hey everyone, my 04 summit 800 has a high idle when i stop, idles down eventually, or can flip the ...


  1. #1
    Member mike04's Avatar
    Join Date
    Feb 2013
    Location
    north idaho
    Posts
    6
    Post Thanks / Like

    04 800 high idle

    hey everyone, my 04 summit 800 has a high idle when i stop, idles down eventually, or can flip the choke to idle it down. It did the same thing with the old motor. I replaced the pilot jets with 20s, it helped a little, but still does it, anyone have any more suggestions, thanks.



  2. #2
    Senior Member
    CUSO's Avatar
    Join Date
    Jan 2007
    Location
    Edmonton
    Posts
    3,763
    Post Thanks / Like
    www.avalanche.ca
    www.zacstracs

  3. #3
    Senior Member
    duck's Avatar
    Join Date
    Dec 2006
    Location
    Cardiff Echoes, Morinville
    Posts
    6,664
    Post Thanks / Like
    Blog Entries
    2

    Re: 04 800 high idle

    turn the idle speed down....one nurled screw between the carbs
    Lets ride!!!.....

  4. #4
    Member mike04's Avatar
    Join Date
    Feb 2013
    Location
    north idaho
    Posts
    6
    Post Thanks / Like

    Re: 04 800 high idle

    Thanks, will try adjusting the needles, I just replaced the carb boots, thats what caused my old engine to blow, will try the needles and air screws.

  5. #5
    Member mike04's Avatar
    Join Date
    Feb 2013
    Location
    north idaho
    Posts
    6
    Post Thanks / Like

    Re: 04 800 high idle

    The idle screw is ok, after it sits for a min, it will come down to a normall idle, I've checked that. Appreciate the help.

  6. #6
    Senior Member
    duck's Avatar
    Join Date
    Dec 2006
    Location
    Cardiff Echoes, Morinville
    Posts
    6,664
    Post Thanks / Like
    Blog Entries
    2

    Re: 04 800 high idle

    Quote Originally Posted by mike04 View Post
    The idle screw is ok, after it sits for a min, it will come down to a normall idle, I've checked that. Appreciate the help.
    I figured ya checked that.... could be the slides are not in sync.....
    Lets ride!!!.....

  7. #7
    Member mike04's Avatar
    Join Date
    Feb 2013
    Location
    north idaho
    Posts
    6
    Post Thanks / Like

    Re: 04 800 high idle

    can anyone tell me what notch position the needles are on stock setting on 04 800h.o

  8. #8
    Member Clares240's Avatar
    Join Date
    Apr 2012
    Location
    Claresholm Alberta
    Posts
    37
    Post Thanks / Like

    Re: 04 800 high idle

    I'd be willing to bet it's the middle or 3rd position, but I don't know for certain. Most carbs I've ever dealt with had 2 notches either way from the stock setting, usually in the middle.



  9. #9
    Member mike04's Avatar
    Join Date
    Feb 2013
    Location
    north idaho
    Posts
    6
    Post Thanks / Like

    Re: 04 800 high idle

    Thanks, I kinda thought that but was'nt sure.

  10. #10
    Member Clares240's Avatar
    Join Date
    Apr 2012
    Location
    Claresholm Alberta
    Posts
    37
    Post Thanks / Like

    Re: 04 800 high idle

    Anyway, have an 02 800, and the other day I get this idea, maybe I want it to idle a little higher so I pop it up a bit, and low and behold it starts doing just what mike was talking about, set it back, gone. I didn't pop it up much just a little.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Search Engine Friendly URLs by vBSEO