Search results

One of the adjustment screws broke off in my Stihl MS270 saw so I took it to the local Stihl dealer and 5 weeks later after hearing nothing I enquired and they said they were on it. 3 days later they call saying it was ready. Picked it up and got it home and found they had sharpened the chain...

Anyone know what the number is for the bearing in the upper track wheels? I had it written down but can’t find it now. I want to say 6210 or maybe 6410 but can’t remember.

Last trip out on the way out of owlhead did a little fooling around in a meadow and it started to backfire and miss like it was hitting the rev limiter but it wasn’t revving past 7200-7300. Was doing it on the trail out too. It’s never done this before except in hard pack but it was actually...

Trying to figure out which LCA is bent. Should the spring be centered where it goes through the UCA or more towards the front? This is my RH side lining up the shock rod with the upper BJ. This is my LH side It works out to about 1 1/2” of the Rh ski being back farther than the left. Just...

I’m in need of a new coat and some goggles, maybe a pair of gloves. Just wondering where south of red deer a guy can find a place with decent selection for these things. Not really brand loyal but I currently have Klim bibs and gloves which so far have held up pretty good.

Well it’s already started!

Not really a site problem I don’t believe because it does it on all the forums I’m on. iPhone 8 and tapatalk keeps freezing when I’m scrolling. Driving me nuts. Anyone else having this issue?

Looking for info on where to stage and how to get up to the Cessna or DC-3 or whatever it was crash site near the Crowsnest pass.

Buddy’s quad started overheating at 300km. No the rad is not plugged with mud. It’s like new. Rad is full. Overflow tank is up to level. At idle, The fan comes on at about 165F and never shuts off after that and the temp never drops below that either. It maintains 165-170F at idle. When you...

Anyone know if you can adjust the mileage on a used gauge? Found a used gauge for my sled as mine crapped out but it had 5000km on it so when I get it programmed I'd like to get the mileage changed to match what my sled has on it at the same time if I can.

Just installed my previously enjoyed MBRP can and when I install the probe the nut gets tight but the probe is still quite loose in there. Anyone else run into this? What's the fix?

Just curious if maybe some of you don't have some good used/new parts kicking around that you would like to get rid of. I'm in need of a rear shock for my 163" skid, a complete screen kit, a riser for the bars that's a couple inches longer than stock, and a can as this sled still has the...

Was just wondering as I've never seen both machines side by side or with the plastic off if you could put the steering post set up from a 17 on a 16 to get rid of the giant tripod the 16 has? Or if there is a kit to get rid of the floppy u joint set up?

Just a reminder you don't pay PST on avy gear in BC. Just bought a Tracker 3 in Fernie and got charged the PST. Didn't realize it till I got home so gotta go back later this week and sort it out. See page 4 in the link...

Almost. Just need to put my rigid lights on, a metal plate for my booster and 2-way antenna's, and figure out what to do for my outside superclamp hooks. Not bad looking for a 15 y/o aluminum deck.

Anyone been by Rene's shop north of Rimbey lately? Is he still in business? My sled deck needs a tune up.

Buddy just picked up an '04 Bruin 350 with 700 km on it and it doesn't idle very well. Backfires and stalls once in awhile but off Idle it runs good. We did the obvious, changed plugs, cleaned the carb, but to no avail. For some reason it's idling very lean no matter how we adjust the...

Anyone ever mod the heavy abortion of a can on these things so they aren't so big and heavy? Like remove one of the chambers? This is the most ridiculous setup I've ever seen. An MBRP new is $345 shipped so I am looking to mod this one or if someone else has a cheap can that would fit that...

Does anybody know if they make locks for electric awnings? Buddy has a new trailer and the pivot part of the awning doesn't lock so even with it all the way open and the knob tightened it can still fold and the awning can come loose/fold up. Not ideal if it gets snow on it or if it's windy. He...

Anyone have an M7000 1059cc on boost around here? Sure don't hear of any, or I have been looking in the wrong area's LOL! I figured there would be more seeing as they are virtually the same as a Viper - as much as Yammy guys don't want to hear that.:d If there are any whose kits y'all running...