who makes the recommended rear aftermarket bumper
seeing that the cooler does not run the length of the tunnel now might need a little extra support for the bungi pulls
had the xm out today and it has developed a engine miss started right at the beginning of the day
engine runs good up to 7000 rpm but when you go wide open the engine has a miss in it like the engine cuts right out and back on.
sled will not rev above 7200 tried adjusting the clickers on the...
Looking at purchasing a quad for the summer. Just wondering how the can am quads faired against the others. Looking at the 500 size
Have had honda's in the past but looking for something with better ride but same reliability.
thanks Driller
Hello
I am looking at purchasing a new quad and the question I have is how much difference is there between the old style 500 polaris and the newer style 550. Pretty hard to tell this in the dealers yard.
Thanks Driller
HELLO
have a 07 rev 800 xrs
had a couple problems today on the short ride we took.
if i turn had warmers on high the tack goes dead at an idle, if over 3000 tack not affected
also do not have any hand warmers on high or low.
third thing was the machine had a mid range boog just like the kill...
I am removing 159 track and installing a 162 track same pitch into 07 rev
do you think there is enough adjustment on the rear wheels for this or is there a mod i will have to do. Do not want to go to the two set up with offset axle.
thanks driller
Hello Artic Cat owers
how does a m series sled ride in comparison to a summit rev
looking at a m6 for my son or a rev 600
can you upgrade a m6 to m7 horsepower after he gets a year or so in
the rev 600 is limited what you can do
thanks driller
Hello fellow riders
I am looking at buying a 600 for my son and have decided on a 600 rev but am unsure of which one to buy. have a 04 600 or a 07 600 that i am looking at price difference is about a thousand dollars. my question is how much difference between the sdi and the ho engine is there...
Hello
I am looking for someone to haul a sled from edmonton area to mcbride
will to pay for part of your fuel bill to mcbride or a reasonable price for the effort
thanks driller
Hello Fellow Quaders
I have a 450 grizzly Kodiak i have always had honda quads before and i find this 450 is very heavy steering when in 4wd mode. Any solution for this
It has stock tires
has anyone tried these tires side byside? What are your thoughts? Ride alot of trail very little mud? also should a guy stay to the stock size or go bigger
700 grizzly do not want to give up throttle response . Thanks Driller
I bought a grizzly 700 eps the other day with 800 klms on it. Seems to be in pretty good shape but I don't thing the powersteering is working right. The manual says after engine is started the eps light should go out and it does until you try to steer the machine for a few seconds then the light...
I bought a grizzly 700 eps the other day with 800 klms on it. Seems to be in pretty good shape but I don't thing the powersteering is working right. The manual says after engine is started the eps light should go out and it does until you try to steer the machine for a few seconds then the light...
Hello fellow riders
I am looking at getting a couple of quads or bikes for me and my 13yr son
I am unsure of which to get him into. I have owned quads for a long time but sold my last one last summer. We like to explore areas go up through the bush and find ways to get into areas the average joe...
which mag goes in top case and which one in the bottom case blue yellow wires to one green gray wires to the other ? or which mag is for forward and which is for reverse?
Thanks Driller