Recent content by markoo

check compression. probably low and then one plug fouls

Notice how the RCMP says the seizure was near the blockade, not in the blockade. "Alberta RCMP submitted this photo of what they say is a cache of firearms and ammunition found in three trailers near the blockade of the Canada-U.S. border. (Submitted by Alberta RCMP)"

This was actually in the globe and mail, "The arrests began after RCMP tactical officers raided two camper trailers and a mobile home on 1st Avenue North in Coutts shortly after midnight on Monday."

The media loves to lie to us. The guns were seized from trailers at a residence by coutts, not from the convoy. This had nothing to do with the main protestors.

Yes I put in 3" drivers. Same as the t3.

I put a 9115m in my g4 to replace the crappy 165. Huge improvement. Hooks up so much better.

Thanks but already sold.

I have a 2019 850 x 165 and I want to put a 175" track under it. Not sure want I all need to make this work. Can I just use 5" rail extensions and new sliders? How about the tunnel. I was thinking of just adding the expert flap and leaving the tunnel the same length. Also what is the best...

Ever start your sled with the hood off? If the gauge cluster is unplugged it can hurt the coils.

Start with replacing spark plugs

I know the owner. He's from monarch. His son will contact you.

Crankcase won't fill with fuel injected engine. If its flooded the spark plugs are wet and won't spark. Simply dry plugs or replace them.

S module is bent.

Black stuff like that must be coming out of your pipe. Donut between pipe and y pipe might not be sealed

If your doing the s module and the e module count on at least 10 hours. no way you can do it in less.