Sides get sticky on older Marathon decks when the polymer disks on the side arms are lost, you may consider doing the following:
- Pull your sides out
- Clean the arms of your expandable sides with T.S.P or some other type of de-greaser
- Apply 8 Polymer disks on each arm (2 on each face), 48...
UTV Extension, Skinny Ramps, and an Adjustable Wireless Winch Loading System should get you to where you are going.
Truckboss Modular Aluminum Sled & ATV Truck Decks 866 440 6800
Not on our site, but here are some photos for you
We put Superglides on the ramps for snowmobiles
For more information phone us at 866 440 6800 or visit us in Edmonton at 7719 44 A St.
Single Hauler 5.5' Deck - For Full Size Trucks with 5.5' to 6.5' Boxes
Includes 5.5' Single Hauler, 2x Telescopic 8' Ramps,
1x Folding "Track" Ramp, Width Adjustable Trays for Over-Width ATVs
$995 we have 2 in stock 866 440 6800
TRUCKBOSS 7 Base with a 10' Fat Ramp, Ramp Bar and Carbide Kit is $3650
Sealed Storage
Unlimited Tie down points
Fully Anodized
All Aluminum Extrusion Construction
and the Base TRUCKBOSS is easily upgrade-able if you decide to have expandable sides in the future
Base Deck in the photo is a...
The Classic was limiting, and if you took into perspective what you were getting for $3600-$3800 (Marathon Classic retail value), it was a very steep investment for something that would be used for 4-5 months, retired for the summer, and repaired in the fall (replacing or re-staining plywood...
The first image is a typical survey set-up with a 7 compartment aluminum box mounted on a rolling Cargobed the other two images are our short box boxes that have UHMW runners for ease of pull out vs. a Cargobed
Marathon's Truckboss seals your truck box, is fully anodized, is 100% North American Made, has 60 ft. of easily adjustable tie down points, can be mounted with an adjustable winch, is fully made up of interlocking extruded aluminum parts, any accessory that accepts a 5/16" carriage bolt can be...