Recent content by Dulley

Good on you guys...

Good stuff... I carry a lot of the items mentioned, I will be adding an extra mid layer/wool sweater. An item I also carry is a Solo stove. Fits inside a large cup and you can burn wood, fuel cells.

Echo, on 118 ave.

I have a 14 orange and black M8000, the paint on the rear bumper started to peel after a couple of rides, dealer replaced under warranty no problem..

What do you mean " too much power"

Welcome back, I took my 12 yr old to Foam in Blue River for his first mountain trip. He's on my old Summit 600 with a 136. It seemed like he was stuck every 20 ft once we hit the alpine but once he figured out the fun flipper he did great.

Looks interesting, at that price point I would buy it, if it works it would be money well spent. I think you would have to keep it away from the snow or you would be putting moist air into the box.

Need to know if there is a good aftermarket hand warmer kit for the M8000, had the right fixed a couple of weeks ago, now the left has quit working, any suggestions?

No issues with my 2014 ltd, like a previous note every time you adjust the height, make sure you pull up to lock into place.

Not much run, only 10k, I will keep an eye on it, at 200.00 bucks a belt I think I will let the dealer know what the tech did. Planning on putting some miles on it today. Thanks for the info oneoldfart.

X2 as per tater, also look at putting a can on it, MBRP is 300.00 and loose about 13 lbs from the stock muffler

I pulled the secondary, all looks good, however the belt was running in the wrong direction, put the belt on the right way and now seems to be good, no real noticeable vibration!! This was the first time I rode since I got it back from the dealer for its first service???

I have a 2014 M8000 ltd, has a noticeable vibration at about 6500 rpm on the clutch side. Only has 200 k on it. You can feel it through the tunnel by your left foot. Checked track alignmet and is bangon, no ice build up in the tunnel. Any suggestions, hope it's not a bearing in the secondary!

I have a 2014 M8000 ltd, has a noticeable vibration at about 6500 rpm on the clutch side. Only has 200 k on it. You can feel it through the tunnel by your left foot. Checked track alignmet and is bangon, no ice build up in the tunnel. Any suggestions, hope it's not a bearing in the secondary!

I ordered 2 of the solo stove/pot combo from amazon, very well built and compact, will be a good addition to the pack. 1 is for me and 1 is for my 12 yr old who is just starting to the sledding world.