Recent content by DoubleYou

I would have thought going in forward could cause a rail to stab into the track but not reverse? No crossbars are bent or broken I’ve never paid attention much until now but when it got stuck, none of the paddles were sitting on top of cross braces, they were all sticking through the spaces...

Bit late getting back but thanks for the replies. Finally had it out this season and it did same thing, I paid a little more attention this time. It’s right as the track makes full contact with the ramp and the skis are still almost a foot away from the ramp. There is maybe 6” of clearance...

No it doesn’t look like anything is catching & doesn’t feel like I’m snagging anything either, feels more back in the track, not really something catching the transition. It’s a firm dead stop, not a scraping or rubbing or slowing down. It’s a ‘21 Khaos so it does have some clearance

Does anyone have an Mline deck and ramp? I just picked one up, 10’ ramp, and tried to load and unload a few times and my god, unloading is damn scary. Get about 1/2 way down and right as the skis come off the deck onto the ramp and the track comes to a dead stop, it’s like the paddles get...

un****ingreal. Changed the fuel filter, checked the reeds & went out for a ride. Now it won’t even idle, on top of being hard as **** to start. The throttle felt fine but I was looking around the throttle bodies, contemplating ghost riding it off a cliff & walking back to the truck, & I see...

Still stuck on this. Had it out to a dealer to check tps, they said it was out & adjusted it. Took it for a ride yesterday & problem is still there. Its like it gets vapour locked or something, the longer I leave it after shutting it off, the harder it is to start. 1-2 minutes starts normal...

Has 120-125 compression hot & cold. I’ll check the reeds.

2014, ran great, about 500 miles on it, just put an rktek rev 2 kit in, 25 miles on that. It starts normal when it’s cold & idles the same as stock but once it’s been heated up & ran then it gets harder & harder to start. After a few minutes sitting it will start first pull but only idling...

Does anyone have settings for the tps? Have to replace mine

Want to use it for android tv. I figured I'm gonna get what I pay for, can't expect a lot from a free service. I had it on my mind that it would be a smarter way to go about watching iptv but then I read that if they really want to track what's going on that they can.

I've never used one before, any recommendations?

Thanks. Was a bit unsure, looked at bmp & they list the y-pipe as being different for 08-09 & 10-11

Which bolt hole? So I could bolt a long block '10 into an 09 chassis with everything else bolting up to it?

The 08's are different from the 09's. But what about the 2010's, are they the same as the 09's?

Just bought it busted like this, agreed, odd to leave it in this state. Said it was running wide open for most of the day then died,(didn't ask if it was a no start or a big bang) had to get towed back so I'd say it wasn't running once whatever happened, happened. Any ideas on how to remove the...