Recent content by borsky

Polaris 800's like the adjustable weights like MDS or Rooster loaded heavy at the heel or close to the pin, makes huge difference. my 2 cents

get a BD fuel box and remap, no more lean conditions and more power.

I put the BMP stg 2 on after a 105 mile break in i will report back.

I put 104 miles on this stock 163 3" in valemount . I did do the kmod arms and i put the kmod skid from my 15 RMK in it and the triple rate springs on the factory walker clickers. also fully clipped track, installed delrin in secondary and set primary side sheave clearance. I rode with a...

Anybody try the bike man kits?

thnx. shoulda known that with more power. but i heard they changed the clutch a bit so didn't want to assume.

perfect do u know if it more or less weight then a pro?

I have weights off of a pro will it work on my new axys

Id try the 62's and if u have trouble holding rpms run the blue and pink slp primary spring, before trying 60's

I agree with venting the cap before messing with the pump, my 15 pro used the proper amount of oil form the factory, I would suggest running the sled and gauge the consumption before changing anything. Imo the new sleds didn't need to be adjusted like the earlier models, but it can be...

20/46 with 74 pitch chain. its tight but fits. or any other combo that gives you 2.3:1 ratio 19:43 is 2.26 and u can use the stock chain i think so its the cheapest. IMO with the 20 on top its the more efficient. its what i run on my 163" and I'm happy

no turbos on sale?

14500 on a snow check

I need one too same deal smashed into something mine is way beyond repair with freezing... Pm me if u got one

I'm pretty sure on a standard rmk the front cooler is not thermostat controlled and is always circulating. thats why the drop temps while driving down mine did the same thing I wouldn't worry about it to much, it s the sudden change in temps that s hard on engines not running at 108, my pro...