greenthumb
Active VIP Member
Anyone know of any other triggers for the brake warning on the dash other than the usual? Nothing in the service manual.
Been getting it almost continuously on the trail the last couple days. Releasing the throttle briefly is the only way to get it to stop, roughly 30 seconds later it's usually back.
In addition to the red light, it is also beeping and the word "brake" is displayed across the bottom of the gauge. The owners manual doesn't say it should be beeping or displaying the word, but it could be an error.
It's not ice in the lever.
The lever is stock.
The switch is installed properly.
You can hear the switch clicking internally.
Pushing the lever out does nothing.
Pumping the brakes does nothing.
Here's the kicker- the brake light functions normally. As in when you let go, it goes back to the tail light immediately.
It's only a 2 wire switch, so it's the same trigger for the light as the ecm monitoring the conditions.
The sled is operating completely normal otherwise.
Been getting it almost continuously on the trail the last couple days. Releasing the throttle briefly is the only way to get it to stop, roughly 30 seconds later it's usually back.
In addition to the red light, it is also beeping and the word "brake" is displayed across the bottom of the gauge. The owners manual doesn't say it should be beeping or displaying the word, but it could be an error.
It's not ice in the lever.
The lever is stock.
The switch is installed properly.
You can hear the switch clicking internally.
Pushing the lever out does nothing.
Pumping the brakes does nothing.
Here's the kicker- the brake light functions normally. As in when you let go, it goes back to the tail light immediately.
It's only a 2 wire switch, so it's the same trigger for the light as the ecm monitoring the conditions.
The sled is operating completely normal otherwise.